Powder coatings for metal · Since 2019

Every batch true to the approved panel.

Epoxy, polyester and hybrid powder coatings, matched to your colour and finish and supplied within 10 days.

Request a sample Explore finishes

Five powder-coated test panels on a black stone plinth: hammer tone, sand texture, bronze metallic, red high gloss and black wrinkle — Hammer · Sand · Metallic · Gloss · Wrinkle

5,000 tAnnual capacity

8Production lines

≤ 10 daysStandard lead time

~20Export countries

1,000 kgMinimum order

Qualicoat Class 1 · P-2199ISO 9001:2015ISO 14001:2015SGS EU RoHS report8 production lines5 sampling lines2 metallic bonding machines5,000 t per year~20 export countriesNational High-Tech EnterpriseRAL & custom colours10 surface effects

Colours & finishes

Ten surface effects, one approved version.

RAL shades and customer samples in every effect. Each finish is confirmed on a physical panel, then kept as the reference for repeat orders.

Smooth

All gloss levels

Sand texture

Cabinets · enclosures

Wrinkle

Equipment

Vein texture

Decorative metal

Fine texture

Soft-touch look

Hammer tone

Machinery · tools

Pattern

Antique & art

Metallic

Bonded on 2 machines

Amber translucent powder coating over brushed aluminium, macro

Transparent

Clear & tinted

Fluorescent

Safety & signal

Three anthracite panels in dead matt, satin and high gloss

Three gloss bands, measured, not guessed.

Dead matt≤ 10

Satin & matt11 – 80

High gloss≥ 90

Three product systems

Chosen by where the part will live.

Outdoor or indoor, decorative or functional. The environment decides the chemistry; the panel confirms it.

Outdoor

PolyesterQualicoat

Weather-resistant, resists yellowing, strong edge coverage and impact strength.

Typical partsAluminium profiles, outdoor furniture and lighting, AC housings, farm machinery

Polyester range

Indoor · decorative

Hybrid

Epoxy-polyester with good flow and high gloss, for appearance-led indoor metal.

Typical partsAppliances, steel furniture, shelving, indoor lighting, instrument housings

Hybrid range

Indoor · functional

Epoxy

Chemical resistance, electrical insulation, hardness and strong adhesion.

Typical partsSecurity doors, safes, electrical cabinets, industrial and fitness equipment

Epoxy range

All systems in standard and low-cure grades. Epoxy and hybrid are for indoor use. Qualicoat Class 1 applies to polyester system PLM100611 only.

Industries

Eight industries, matched part by part.

Each page sets out the buyer’s problems, the system we propose and what we verify on your part before bulk supply.

Building facade with anthracite powder-coated aluminium fins

Recommendations are a starting point. Final suitability depends on your part, pretreatment, film thickness, cure, specification and a line trial.

A single anthracite hammer tone test panel on a black plinth — Approved panel · Hammer tone · RAL 7016

The approved version

Your panel becomes the standard.

01
Tell us the part
Use, environment, substrate, target colour and finish.
02
We match and make panels
System, colour, gloss and texture against your sample.
03
You trial on your line
Your pretreatment, film thickness and cure.
04
The approved panel is recorded
With its system, colour, gloss, texture, film and cure.
05
Every repeat order follows it
Eight production lines, standard lead time within 10 days.

Lead times for complex custom colours and large volumes are confirmed per order.

Distribution warehouse with powder cartons and colour panels

For distributors

One source for your whole market.

Polyester, hybrid and epoxy plus the effects series, so you can serve applicators and manufacturers from one supplier.

01
Starter pack · catalogue, certificates, colour cards, panels
02
End-user screening · applicators, aluminium, furniture, cabinets
03
Sample trials · you bring the part, we match the colour
04
Repeat orders · non-exclusive to start, regional terms on results

Become a distributor

Inside the factory · Zhangzhou

Eight lines, one lab behind them.

Premix, extrusion, grinding and metallic bonding in-house, with every batch tested before it is packed. See the factory

Twin-screw powder coating extruder with cooling belt — Melt extrusion

Metallic bonding machine — Metallic bonding

60° gloss measurement on a green panel — 60° gloss check

Loading powder into the laser particle size analyser — Particle size

Quality & certificates

Every claim has a certificate number.

The approvals buyers ask for first, with numbers and validity you can check. Click to view the certificate or download the PDF.

Architectural coating approval

Qualicoat Class 1

Licence: P-2199
System: Polyester PLM100611 · gloss category 3
Valid: 20 Oct 2025 – 31 Dec 2026
Scope: The approved polyester system only

PDF

Quality management system

ISO 9001:2015

No.: 05326Q01777R001
Valid: 12 Oct 2026 – 11 Oct 2029
Scope: Design, manufacture and sales of thermosetting powder coatings

PDF

Environmental management system

ISO 14001:2015

No.: 05326E01349R001
Valid: 12 Oct 2026 – 11 Oct 2029
Scope: Design, manufacture and sales of thermosetting powder coatings

PDF

Third-party test report

SGS · EU RoHS

Report: XMNEC26001081101
Issued: 12 May 2026
Result: Pass, black powder sample; all ten substances not detected

7 pages

In-house laboratoryColour · 60° gloss · film thickness · particle size · salt spray · UV ageing · hardness · impact · bend · cross-cut adhesion Internal evaluation, not third-party reports.

Start a project

Send us your most-used colour and your hardest one.

Tell us the part, environment, process and expected volume. We reply with a proposed system and a sample plan. Orders from 1,000 kg.

Send project details